Lycaner - No worries on your English its a lot better than my German.

MediaDog should be able to get your sorted out but from a technical standpoint, I think you need a little help on your problem. There are a few people her from Germany that maybe able to help you with posting your technical issues so that Jim can get you squared away quicker.

See if DJ Doena can help you out, here is his profile -  http://www.invelos.com/UserProfile.aspx?Alias=DJ%20Doena

-Robert

Quoting lycaner:

Quote:
Hi,

i have new Installed under Windows 7 DVD Profiler and the Pugin Ptouch Label and Barcode Print and Save.

Now, its not the Problem under Windows 8 or 8.1 ist the same Problem under Windows 7.
I have a new QL 720 Printer. So, now work the printer very good, but the Plugin works under windows 7 and the Printer 720's series not.

Have any one this Problem see ? Or can any one help me ?

Chris

PS: Sorry for my very bad English, its not my native Language, i'm write normaly in German.

Courtesy of Google translate:
Sie können in Deutsch sprechen, wenn Sie es wünschen.
Es gibt viele Leute hier, die für uns übersetzen kann.

And I understand just a little also. (I would have expected "auf Deutsch" not "in Deutsch" - is Google correct?)

Quoting mediadogg:

Quote:
Quoting lycaner:

Quote:
PS: Sorry for my very bad English, its not my native Language, i'm write normaly in German.

Courtesy of Google translate:
Sie können in Deutsch sprechen, wenn Sie es wünschen.
Es gibt viele Leute hier, die für uns übersetzen kann.

I would be one of them.

Hi to all,
Hallo an alle Forums besucher und die hier geschrieben haben.

Ich habe die alte Vorlage von LBX 5.0 zu LB 4.2 transferiert.
Nun klappt auch das leider nicht, es kommt ein fehler:

Der Typen Initialisierer für "PTouchLabel.PTouch" hat eine Ausnahme verursacht.

Woran könnte dieses Problem liegen ?

Thank You all helper and a good Day to you.

Chris

EDIT: alle correct writed.

Quoting lycaner:

Quote:
Der Typen Initialisierer für "PTouchLabel.PTouch" hat eine Ausnahme verursacht.

The type initializers has caused an exception.

That usually happens when two parts of a program (two DLLs) don't match together. One DLL needs information from the other and when the program was created it was "built" against the other. And now one DLL is newer than the other (or different) and the required information is not where it's supposed to be.

Have you tried to properly de-install and re-install the plugin?


Hast du versucht, das Plugin sauber zu deinstallieren und dann wieder frisch zu installieren? Oder hast du da nur irgendwie die neue Version drüberkopiert?

Quoting lycaner:

Quote:
Hallo an alole Forums besucher und die hier geschrieben haben.

Are you sorry for your bad German?

Thanks for the good information:

Did you remember to install the Brother b-Pac SDK on the new system? (you can install either the full SDK or just the Client).

I see now they make it clear which SDK you need for each editor version, OS version and label format. This was not clear in the past, and many people (including me) had problems.

Maybe that is the missing .DLL?

Actually, the order shouldn't matter, but go ahead and try that. The most important thing is that the correct version of SDK and label format is used. My software needs .LBL in 4.2 format.

Also, I still am curious about exactly when the message appears. Is it when DVDP is loading, or when you click the plugin menu, or when you load the label, or when you click "print"?